Description
Lenze's E84AYCPMV is a dedicated PROFIBUS module intended for use with 8400 inverter drives. This device enhances communication within industrial networks by supporting both PROFIBUS DP-V0 and DP-V1 profiles, ensuring seamless data transfer across multiple devices. The module is fitted with a 9-pin Sub-D connector, providing a reliable physical interface for connection.
Operating via RS485 bus coupling, this module supports a network topology that can be either line or tree structured, with the option to include repeaters. It accommodates communication speeds ranging from 9.6 kbps to 12 Mbps, automatically adjusting to optimize transmission efficiency. The configuration allows for quick setup, capable of managing up to 31 slave devices without any repeaters, or expanding to a maximum of 125 slaves when deployed with repeaters.
For convenience in system design and use, the E84AYCPMV supports customizable station addressing through the use of either DIP switches or software, allowing for addressing of 1 through 126. The module features five diagnostic LEDs, assisting users in monitoring operational status and troubleshooting potential issues. Each direction is capable of handling 16 process data words, providing ample data exchange capabilities for various applications.
The product is CE and UL certified, confirming its compliance with industry safety standards. It operates with protective insulation in accordance with EN 61800-5-1, ensuring reliability in demanding environments. The module is powered directly by the associated inverter drive, conveniently eliminating the need for separate power supply arrangements. Additionally, it is coated for enhanced environmental protection, significantly increasing its durability against industrial challenges.
Technical specifications for E84AYCPMV
| Manufacturer | Lenze |
|---|---|
| Series | Series 8400 |
| Part Number | E84AYCPMV |
| Product Type | PROFIBUS module for Lenze Inverter Drives 8400 |
| Communication Profiles | PROFIBUS DP-V0 and DP-V1 |
| Interface | 9-pin Sub-D connector |
| Communication Medium | RS485 bus coupling |
| Network Topology | Line or tree with repeaters |
| Baud Rate | 9.6 kbps to 12 Mbps (auto-detect) |
| Maximum Number of Slaves | 31 (no repeater), 125 (with repeater) |
| Cable Length | Up to 1200 m (depends on baud rate) |
| Conformity Approvals | CE and UL certified |
| Station Addressing | DIP switches or software (1–126) |
| LED Indicators | Five diagnostic LEDs |
| Data Exchange | 16 process data words per direction |
| Protective Insulation | Complies with EN 61800-5-1 |
| Voltage Supply | Powered by inverter drive |
| Environmental Protection | Coated for enhanced durability |
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Trusted By
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator